FT-221

A few months ago I obtained a nice old Yaesu FT-221 with the original Yaesu mic and a CommSpec TE-32 that was added in order to use it with repeaters. The FT-221 is a 2 meter all-mode radio that was produced in the mid-1970’s. I got it from a friend and fellow operator, Tom, W9IPR. It was his, then it was his mom’s, and then it was his again. Tom was selling it and I have a soft spot for radios of the 1970’s. The price was right so it followed me home.

FT-221

While I know the Kenwood 2 meter all modes of that time (700A and 700SP) the first I’d heard of the FT-221 was the day that I bought it. It reminds me of the Kenwood’s.

It was cold and rainy today and while there were things that I needed to do what I wanted to do was to check out this radio after it had been sitting on my bench for a bit.

It’s a very nice radio that is really well built. Each subsystem is on its own board which plugs into what is essentially a backplane on the bottom of the chassis.

FT-221 inside

Being an old radio I searched for and quickly found the service manual. It is highly detailed and very well written, going through each board and its interactions with the overall. The service manual mentioned extender boards for service. It seemed like a good item to have on hand but I figured that it would be unobtainium but John, WA1ESO builds them along with a number of other similar boards. The extender board essentially moves the edge connector up from the backplane so that you can plug a board in and access signals and components for troubleshooting.

FT-221 with extender board

After a bit of research I found that Yaesu produced an FT-221R sometime after the FT-221 that apparently allowed for other than 600 kHz repeater offsets. The FT-221’s were replaced by the FT-225 which among other things added a digital display. A digital display was an option for the FT-221’s, the YC-221. A bit of searching shows that this may indeed be unobtainium but maybe one will show up some day.

I don’t operate 2m SSB all that often but it is fun when I do. I have an old Kenwood TR-9000 and a TR-9130 that I use with my Elk Antennas 2M/440L5. It’s not a great VHF station but I can make contacts with it.

2 meter all-mode radios

I like the old dedicated VHF\UHF all-mode radios of the past. I don’t believe that anyone makes one today. I realize that there are a few radios (IC-9100, TS-2000, IC-7100, FT-857, FT-817) that have VHF\UHF support but they are shack-in-the-box radios with HF capabilities as well. Nothing wrong with that. I have some of these radios and like them just fine. There’s just something neat about the old dedicated radios like the TS-700A\700SP, TS-600, FT-847, IC-290, TM-255, TS-60, TR-751, TS-711, IC-211, IC-271, IC-275, etc. At one time there were quite a few of them. Now you’re shopping the used market to find one.

I’m glad to add the FT-221 to my station and pleased that it came from W9IPR. Now I’m almost going to have to add a Kenwood TS-700A\700SP to balance the FT-221.

I told you that I have a thing for radios of the 1970’s.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s